| Code | Mnemonic | Description |
|---|---|---|
| 0F 01 /0 | SGDT m | Store GDTR to m |
| 0F 01 /1 | SIDT m | Store IDTR to m |
Stores the contents of the global descriptor table register (GDTR) or the interrupt descriptor table register (IDTR) in the destination operand. The destination operand specifies a 6-byte memory location. If the operand-size attribute is 32 bits, the 16-bit limit field of the register is stored in the lower 2 bytes of the memory location and the 32-bit base address is stored in the upper 4 bytes. If the operand-size attribute is 16 bits, the limit is stored in the lower 2 bytes and the 24-bit base address is stored in the third, fourth, and fifth byte, with the sixth byte filled with 0s.
The SGDT and SIDT instructions are only useful in operating-system software; however, they can be used in application programs without causing an exception to be generated.
See "LGDT/LIDT — Load Global/Interrupt Descriptor Table Register" in this chapter for information on loading the GDTR and IDTR.
| Operands | Bytes | Clocks | |
|---|---|---|---|
| mem48 | 5 | 4 | NP |
| ID | unaffected | DF | unaffected |
|---|---|---|---|
| VIP | unaffected | IF | unaffected |
| VIF | unaffected | TF | unaffected |
| AC | unaffected | SF | unaffected |
| VM | unaffected | ZF | unaffected |
| RF | unaffected | AF | unaffected |
| NT | unaffected | PF | unaffected |
| IOPL | unaffected | CF | unaffected |
| OF | unaffected |